Setting Tile: Revised And Updated (Fine Homebuilding) Ebook Rar
LINK ->>->>->> https://urlca.com/2tv8Mj
Setting Tile: Revised and Updated (Fine Homebuilding) ebook rar
If you are looking for a comprehensive guide on how to design and install your own tile floors, walls, countertops and shower stalls, you may want to check out Setting Tile: Revised and Updated by Michael Byrne. This book, published by Taunton Press in 1995, is a revised and updated version of Byrne's previous work on the same topic. It covers all the up-to-date information you need to create a beautiful tile job that can make a room.
In this book, you will learn about the history and types of tiles, the materials and tools you need, the safety precautions you should take, the surface preparation and layout techniques you should follow, the methods and tips for setting different kinds of tiles, the troubleshooting and repair solutions you can apply, and the finishing touches you can add to your tile project. You will also find hundreds of photos and illustrations that show you step-by-step how to achieve professional results.
Setting Tile: Revised and Updated is available as an ebook in rar format, which you can download from various online sources. You can also buy the paperback version from Amazon or other bookstores. Whether you are a beginner or an expert, a homeowner or a contractor, this book will help you master the art and craft of setting tile.
Before you start installing tile, you need to prepare the surface, the tile, and the adhesive. Depending on the type and condition of the surface, you may need to clean it, level it, waterproof it, or apply a tile membrane to improve the bond and prevent cracks. You also need to measure and mark the center of the surface and draw a grid to ensure symmetry. You can use a chalk line, a carpenter's square, and a level to make accurate marks.
Next, you need to choose the right adhesive for your tile and surface. Thin-set mortar is the most common and versatile option, but you may need a special type of mortar for large tiles, natural stone tiles, or glass tiles. You also need to mix the mortar properly according to the manufacturer's instructions. You can use a drill with a mixing paddle attachment to get a smooth and consistent consistency. Let the mortar rest for about 10 minutes before using it.
Then, you can start laying tiles from the center of the surface outward, following your grid lines. Apply an even layer of mortar to the back of each tile (this is called back-buttering) and press it firmly onto the surface. Use spacers between each tile to create even grout joints. Check the alignment and levelness of each tile with a straightedge and a level. You may need to cut some tiles to fit around edges or obstacles, using a tile cutter or a wet saw.
Finally, you need to let the mortar cure for at least 24 hours before applying grout. Grout is a paste that fills the gaps between tiles and adds color and texture to your tile job. You can choose from different types and colors of grout depending on your preference and tile style. You need to mix the grout with water until it has a peanut butter-like consistency. Then, you can use a rubber float to spread the grout over the tiles, forcing it into the joints. Wipe off any excess grout with a damp sponge and let it dry for another 24 hours. aa16f39245